Replacement and Installation of Windows

Correct installation of windows is possible only if all technological standards are observed. The guides contain standards, features, and procedures of such work. This is a responsible process that can be entrusted only to experienced specialists who know all the nuances of the entire process.

Replacement of Old Windows

In such a case, the window opening should be completely cleared. For high-quality installation of the structure, the opening is levelled, deep depressions, cracks and gaps are removed. When replacing, it may be necessary to dismantle old window bars or metal doors. It should be noted that lattice replacement is not necessary, here everything depends on the client's wishes.

Without preserving the structure. This is normal dismantling. Structures are dismantled, construction waste is packed and sent for recycling.
With the preservation of the structure. The dismantled structures may be used at other facilities. In such cases, specialists carefully dismantle the old windows while preserving the structures, and the construction waste is sent for recycling.

How Windows Are Installed

Installation is a high-tech procedure in which the quality of absolutely all operations matters:

1. Assembling of the frame in the opening. The frame without sashes and double-glazed structure is fixed in the opening using fasteners - anchor bolts, self-tapping screws, dowels. To avoid skewing of the structure, provoking incorrect operation of the fittings, the installation of the frame is carried out strictly according to the level.

2. Sealing the opening. For sealing construction joints, polyurethane foam, steam and waterproofing tapes, plaster mix and silicone sealants are used, which ensures high insulating qualities during operation.

3. Fastening of the drip line. It is made on waterproofing tape from the outside of the window frame.

4. Hanging sashes on the frame and installing double-glazed structures. At the same time, the tight closing of the sashes, the clear and smooth operation of the fittings are an indicator that the correct installation of plastic windows has been performed.

5. Installation of a window sill. This stage of work also has its characteristics. The window sill is not pressed tightly but is placed on supports on a level with a slight tilt towards the room. Polyurethane foam is point wise applied to its base and, after it has completely dried, this space is foamed, without fear that the window sill will bend.

6. Installation of slopes, adjustment of fittings. After installing the slopes, the fittings are adjusted and the profile is cleaned from the adhesive film.

Thus, the same company should be engaged in the production of windows, their installation, as well as warranty and post-warranty service. Because in case of problems, you can always turn to the specialists of such a company for help.